|
Poly Performance JEEP/TRUCK & BUGGY » Lockers » ARB Lockers » ARB Air Locker Parts » ARB RD01 Parts - Toyota 8", 45mm Carrier Bearing
ARB RD01 Parts - Toyota 8", 45mm Carrier Bearing |
Description:
| Specs: |
|
| Axle Spline |
30 tooth, Ø33mm (13.1") |
| Ratio Supported |
All |
| Ring Gear ID |
126.00mm (4.96") |
| Ring Gear OD |
200mm (8") |
| Ring Gear Bolts |
10 bolts on Ø160mm (6.30") |
Ring Gear Torque
|
95Nm (70 ft-lb) |
| Backlash |
0.15-0.25mm (0.006-0.010") |
| Bearing Cap Torque |
95Nm (70 ft-lb) |
| Part # |
Item # |
Total #
Req'd |
Description |
Notes |
| ARB-020101 |
01 |
1 |
Flange Cap |
- |
| ARB-050102 |
02 |
1 |
Clutch Gear |
- |
| ARB-010104 |
03 |
1 |
Differential Case |
- |
| ARB-150101 |
04 |
4 |
Return Spring |
- |
| ARB-120102 |
05 |
2 |
Cross Shaft Retaining Pin |
- |
| ARB-120302 |
* |
2 |
Cross Shaft Retaining Pin |
- |
| ARB-060103 |
06 |
1 |
Long Cross Shaft |
- |
| ARB-060303 |
07 |
2 |
Short Cross Shaft |
- |
| ARB-040103 |
08 |
1 |
Piston |
- |
| ARB-160701 |
09 |
1 |
Bonded Seal |
- |
| Unavailable |
10 |
1 |
Cylinder Cap Assembly |
- |
| ARB-200205 |
11 |
6 |
Cylinger Cap Retaining Bolt |
- |
| ARB-150401 |
12 |
6 |
Locking Tab 8mm |
- |
| Not Supplied |
13 |
1 |
Tapered Roller Bearing |
- |
| ARB-150601 |
14 |
1 |
Seal Housing Retaining Clip |
- |
| See Note |
15 |
1 |
Splined Side Gear |
2 |
| ARB-151101 |
16 |
4 |
Pinion Thrust Washer |
- |
| See Note |
17 |
4 |
Pinion Gear |
2 |
| ARB-070101 |
18 |
1 |
Spider Block |
- |
| See Note |
19 |
1 |
Side Gear |
2 |
| ARB-151003 |
20 |
2 |
Side Gear Thrust Washer |
- |
| ARB-100101 |
21 |
1 |
Adjuster Nut |
- |
| ARB-081902 |
22 |
1 |
Seal Housing Assembly |
- |
| ARB-160235 |
23 |
2 |
Seal Housing O-Ring |
1 |
| ARB-170111 |
* |
1 |
Bulkhead Kit, O-Ring Type, 3.5-5mm |
- |
| ARB-170201 |
* |
1 |
Push-In Fitting (5mm to 1/8" BSPP) |
- |
| ARB-170501 |
* |
1 |
Nipple (1/8" to 1/8" BSPT) |
- |
| ARB-170301 |
* |
1 |
Nylon Air Line (5mm DIA x 6m Long) |
- |
| ARB-180103 |
* |
1 |
Solenoid Valve |
- |
All parts, including o-rings, are sold individually.
* Not illustrated in exploded view
1 For replacement O-rings use only BS132 Viton
2 Available only as complete 6 gear set # 728B021
For 8" with 50mm carrier bearing ID refer to RD23
For 8" IFS refer to RD92
 Installation Instructions
|
|
|
|
Click images below for larger view.
RD01
|
|
|
