|
Poly Performance JEEP/TRUCK & BUGGY » Lockers » ARB Lockers » ARB Air Locker Parts » ARB RD09 Parts - Nissan, H233B, 31 Spline (thrust block)
ARB RD09 Parts - Nissan, H233B, 31 Spline (thrust block) |
Description:
| Specs: |
|
| Axle Spline |
31 tooth, Ø32mm (1.26") |
| Ratio Supported |
All |
| Ring Gear ID |
146.0mm (5.75") |
| Ring Gear Bolts |
9 bolts on Ø176mm (6.93") |
| Ring Gear Torque |
142Nm (105 ft-lb) |
| Backlash |
0.15-0.20mm (0.006-0.008") |
| Bearing Cap Torque |
99Nm (73 ft-lb) |
| Part # |
Item # |
Total # Req'd |
Description |
Notes |
| ARB-020302 |
01 |
1 |
Flange Cap |
- |
| ARB-050202 |
02 |
1 |
Clutch Gear |
- |
| ARB-010306 |
03 |
1 |
Differential Case |
- |
| ARB-150101 |
04 |
4 |
Return Spring |
- |
| ARB-120303 |
05 |
3 |
Cross Shaft Retaining Pin |
- |
| ARB-060205 |
06 |
1 |
Long Cross Shaft |
- |
| ARB-060402 |
07 |
2 |
Short Cross Shaft |
- |
| ARB-040202 |
08 |
1 |
Piston |
- |
| ARB-160705 |
09 |
1 |
Bonded Seal |
- |
| Not Available |
10 |
1 |
Cylinder Cap Assembly |
- |
| ARB-200205 |
11 |
8 |
Cylinger Cap Retaining Bolt |
- |
| ARB-150401 |
12 |
8 |
Locking Tab 8mm |
- |
| Not Supplied |
13 |
1 |
Tapered Roller Bearing |
- |
| ARB-100102 |
14 |
1 |
Adjuster Nut |
- |
| ARB-081902 |
15 |
1 |
Seal Housing Assembly |
- |
| ARB-160235 |
16 |
2 |
Seal Housing O-Ring |
1 |
| ARB-150601 |
17 |
1 |
Seal Housing Retaining Clip |
- |
| Not Available |
18 |
1 |
Splined Side Gear |
- |
| ARB-151102 |
19 |
4 |
Pinion Thrust Washer |
- |
| ARB-140201 |
20 |
4 |
Pinion Gear |
- |
| ARB-070201 |
21 |
1 |
Spider Block |
- |
| ARB-110101 |
22 |
1 |
Thrust Block |
- |
| ARB-130202 |
23 |
1 |
Side Gear |
- |
| ARB-151002 |
24 |
2 |
Side Gear Thrust Washer |
- |
| Not Available |
* |
9 |
Ring Gear Bolt Spacer |
- |
| ARB-170111 |
* |
1 |
Bulkhead Kit, O-Ring Type, 3.5-5mm |
- |
| ARB-170201 |
* |
1 |
Push-In Fitting (5mm to 1/8" BSPP) |
- |
| ARB-170301 |
* |
1 |
Air Line (5mm DIA x 6m Long) |
- |
| ARB-170501 |
* |
1 |
Nipple (1/8" to 1/8" BSPT) |
- |
| ARB-180103 |
* |
1 |
Solenoid Valve (12v) |
- |
All parts, including o-rings, are sold individually.
* Not illustrated in exploded view.
1 For replacement O-rings use only BS132 Viton
2 For replacement bearing use Tinken part # LM104949/LM104912
 Installation Instructions
|
|
|
|
Click images below for larger view.
|
|
