|
Poly Performance JEEP/TRUCK & BUGGY » Lockers » ARB Lockers » ARB Air Locker Parts » ARB RD208 Parts - Suzuki Vitara, FR, 26 Spline
ARB RD208 Parts - Suzuki Vitara, FR, 26 Spline |
Description:
| Specs: |
|
| Axle Spline |
26 tooth, Ø27.4mm (1.08") |
| Ratio Supported |
All |
| Ring Gear ID |
108.0mm (4.65") |
| Ring Gear Bolts |
10 bolts on Ø130mm (5.12") |
| Ring Gear Torque |
95Nm (70 ft-lb) |
| Backlash |
0.13-0.0.18mm (0.005-0.007") |
| Bearing Cap Torque |
60Nm (44 ft-lb) |
| Part # |
Item # |
Total # Req'd |
Description |
Notes |
| ARB-023701 |
01 |
1 |
Flange Cap |
- |
| ARB-050701 |
02 |
1 |
Clutch Gear |
- |
| ARB-012802 |
03 |
1 |
Differential Case |
- |
| ARB-150107 |
04 |
4 |
Return Spring |
- |
| ARB-120403 |
05 |
3 |
Cross Shaft Retaining Pin |
- |
| ARB-060106 |
06 |
1 |
Long Cross Shaft |
- |
| ARB-060306 |
07 |
2 |
Short Cross Shaft |
- |
| ARB-040801 |
08 |
1 |
Piston |
- |
| ARB-160306 |
09 |
1 |
U-Ring |
- |
| ARB-031301 |
10 |
1 |
Cylinder Cap Assembly |
- |
| ARB-200211 |
11 |
8 |
Cylinder Cap Retaining Bolt |
- |
| ARB-150402 |
12 |
8 |
Locking Tab (6mm) |
- |
| Not Supplied |
13 |
1 |
Tapered Roller Bearing |
- |
| ARB-150601 |
14 |
1 |
Seal Housing Retaining Clip |
- |
| See Note |
15 |
1 |
Splined Side Gear |
2 |
| ARB-151108 |
16 |
4 |
Pinion Thrust Washer |
- |
| See Note |
17 |
4 |
Pinion Gear |
2 |
| ARB-070701 |
18 |
1 |
Spider Block |
- |
| See Note |
19 |
1 |
Side Gear |
2 |
| ARB-151008 |
20 |
2 |
Side Gear Thrust Washer |
- |
| ARB-100101 |
21 |
1 |
Adjuster Nut |
- |
| ARB-081902 |
22 |
1 |
Seal Housing Assembly |
- |
| ARB-160235 |
23 |
2 |
Seal Housing O-Ring |
1 |
| ARB-170111 |
* |
1 |
Bulkhead Fitting Kit (O-Ring Type) |
- |
| ARB-170201 |
* |
1 |
Push-in Fitting (5mm to 1/8" BSPP) |
- |
| ARB-170501 |
* |
1 |
Nipple (1/8" to 1/8" BSPT) |
- |
| ARB-170301 |
* |
1 |
Air Line (5mm Dia X 6m Long) |
- |
| ARB-180103 |
* |
1 |
Solenoid Valve (12v) |
- |
| ARB-180209 |
* |
1 |
Switch |
- |
| ARB-180210 |
* |
1 |
Switch Cover (Front) |
- |
| ARB-180211 |
* |
1 |
Switch Cover (Rear) |
- |
All parts, including o-rings, are sold individually
* Not illustrated in exploded view
1 For replacement O-rings use only BS132 Viton
2 Available only as complete 6 gear set # 728G011
 Installation Instructions
|
|
|
|
Click images below for larger view.
|
|
