|
Poly Performance JEEP/TRUCK & BUGGY » Lockers » ARB Lockers » ARB Air Locker Parts » ARB RD24 Parts - Nissan H233B, 33 Spline, Drum Brake
ARB RD24 Parts - Nissan H233B, 33 Spline, Drum Brake |
Description:
| Specs: |
|
| Axle Spline |
33 tooth, Ø33.3mm (1.31") |
| Ratio Supported |
All |
| Ring Gear ID |
146.0mm (5.75") |
| Ring Gear Bolts |
9 bolts on Ø176mm (6.93") |
| Ring Gear Bolt Size |
12Nm (70 ft-lb) |
| Ring Gear Torque |
142Nm (105 ft-lb) |
| Backlash |
0.15-0.0.20mm (0.006-0.008") |
| Bearing Cap Torque |
99Nm (73 ft-lb) |
| Part # |
Item # |
Total # Req'd |
Description |
Notes |
| ARB-020302 |
01 |
1 |
Flange Cap |
- |
| ARB-050202 |
02 |
1 |
Clutch Gear |
- |
| Unavailable |
03 |
1 |
Differential Case |
- |
| ARB-150101 |
04 |
4 |
Return Spring |
- |
| ARB-120303 |
05 |
4 |
Cross Shaft Retaining Pin |
- |
| ARB-060402 |
06 |
4 |
Short Cross Shaft |
- |
| ARB-040202 |
07 |
1 |
Piston |
- |
| ARB-160705 |
08 |
1 |
Bonded Seal |
- |
| ARB-030214 |
09 |
1 |
Cylinder Cap Assembly |
- |
| ARB-200205 |
10 |
8 |
Cylinder Cap Retaining Bolt |
- |
| ARB-150401 |
11 |
8 |
Locking Tab (8mm) |
- |
| Not Supplied |
12 |
1 |
Tapered Roller Bearing |
- |
| ARB-100102 |
13 |
1 |
Adjuster Nut |
- |
| ARB-081902 |
14 |
1 |
Seal Housing Assembly |
- |
| ARB-160235 |
15 |
2 |
Seal Housing O-Ring |
1 |
| ARB-150601 |
16 |
1 |
Seal Housing Retaining Clip |
- |
| See Note |
17 |
1 |
Splined Side Gear |
3 |
| ARB-151102 |
18 |
4 |
Pinion Thrust Washer |
- |
| See Note |
19 |
4 |
Pinion Gear |
3 |
| ARB-070201 |
20 |
1 |
Spider Block |
- |
| See Note |
21 |
1 |
Side Gear |
3 |
| ARB-151002 |
22 |
2 |
Side Gear Thrust Washer |
- |
| Unavailable |
* |
9 |
Ring Gear Bolt Spacer |
2 |
| ARB-170111 |
* |
1 |
Bulkhead Fitting Kit (O-Ring Type) |
- |
| ARB-170201 |
* |
1 |
Push-In Fitting (5mm to 1/8" BSPP) |
- |
| ARB-170501 |
* |
1 |
Nipple (1/8" to 1/8" BSPT) |
- |
| ARB-170301 |
* |
1 |
Air Line (5mm Dia X 6m Long) |
- |
| ARB-180103 |
* |
1 |
Solenoid Valve (12v) |
- |
All parts, including o-rings, are sold individually.
* Not illustrated in exploded view.
1 For replacement O-rings use only BS133 Viton 75
2 If ring gear bolts are 10mm then spacers must be used (supplied with kit)
3 Available only as complete 6 gear set # 728A031 (currently unavailable)
For information on RD24 models with metal pistons, contact ARB
 Installation Instructions
|
|
|
|
Click images below for larger view.
|
|
