ARB RD33 Parts - Toyota 8 7/8", 50mm Carrier Bearing

View Large Image

Details:

SKU:	ARB-120303-RD033
Weight:	0.25 lbs
Price:	$5.00

Options:

Part #

Quantity

Add to Cart

Add to Wishlist

Description:

This locker has been replaced by RD142.
Click here to view the new listing.

Specs:
Axle Spline	30 tooth, Ø33mm (1.31")
Ratio Supported	All
Ring Gear ID	138.1mm (5.44")
Ring Gear OD	225mm (8.9")
Ring Gear Bolts	12 bolts on Ø156mm (6.14")
Ring Gear Bolts	120Nm (89 ft-lb)
Backlash	0.15-0.0.20mm (0.006-0.008")
Bearing Cap Torque	110Nm (81 ft-lb)

Part #	Item #	Total # Req'd	Description	Notes
ARB-021703	01	1	Flange Cap	-
ARB-050202	02	1	Clutch Gear	-
ARB-010204	03	1	Differential Case	-
ARB-150101	04	4	Return Spring	-
ARB-120303	05	2	Cross Shaft Retaining Pin	-
ARB-060205	06	1	Long Cross Shaft	-
ARB-060402	07	2	Short Cross Shaft	-
ARB-040202	08	1	Piston	-
ARB-160705	09	1	Bonded Seal	-
ARB-030222	10	1	Cylinder Cap Assembly	-
ARB-200205	11	6	Cylinder Cap Retaining Bolt	-
ARB-150401	12	6	Locking Tab (8mm)	-
Not Supplied	13	1	Tapered Roller Bearing	-
ARB-150601	14	1	Seal Housing Retaining Clip	-
See Note	15	1	Splined Side Gear	2
ARB-151102	16	4	Pinion Thrust Washer	-
See Note	17	4	Pinion Gear	2
ARB-070201	18	1	Spider Block	-
See Note	19	1	Side Gear	2
ARB-151002	20	2	Side Gear Thrust Washer	-
ARB-100101	21	1	Adjuster Nut	-
ARB-081901	22	1	Seal Housing Assembly	-
ARB-160207	23	2	Seal Housing O-Ring	1
ARB-170111	*	1	Bulkhead Fitting Kit (O-Ring Type)	-
ARB-170201	*	1	Push-In Fitting (5mm to 1/8" BSPP)	-
ARB-170501	*	1	Nipple (1/8" to 1/8" BSPT)	-
ARB-170301	*	1	Air Line (5mm Dia X 6m Long)	-
ARB-180103	*	1	Solenoid Valve (12v)	-

All parts, including o-rings, are sold individually.
* Not illustrated in exploded view.
1 For replacement O-rings use only BS136 Viton 75
2 Available only as complete 6 gear set # 728A011

For 8.9" with 45mm carrier bearing ID, 50mm bearings must be acquired. ARB part #160116 and Timken part #32010X-32010X
For 8.9" C-clip model refer to RD124
For information on RD33 models with 4 cylinder cap bolts, contact ARB
Older RD33 models with O-ring grooves in the cylinder cap use; cylinder cap #030209, seal housing #080102 and O-ring BS031 #160209

Installation Instructions