|
Poly Performance JEEP/TRUCK & BUGGY » Lockers » ARB Lockers » ARB Air Locker Parts » ARB RD39 Parts - D35, Non C-Clip, 27 Spline, 3.54 & Up
ARB RD39 Parts - D35, Non C-Clip, 27 Spline, 3.54 & Up |
Description:
| Specs: |
|
| Axle Spline |
27 tooth, Ø29.5mm (1.16") |
| Ratio Supported |
3.54:1 & up |
| Ring Gear ID |
120.7mm (4.75") |
| Ring Gear OD |
193mm (7.6") |
| Ring Gear Bolts |
8 bolts on Ø146mm (5.75") |
Ring Gear Torque
|
75Nm (55 ft-lb) |
| Backlash |
0.15-0.25mm (0.006-0.010") |
| Bearing Cap Torque |
75Nm (55 ft-lb) |
| Part # |
Item # |
Total #
Req'd |
Description |
Notes |
| ARB-021901 |
01 |
1 |
Flange Cap |
- |
| ARB-050501 |
02 |
1 |
Clutch Gear |
- |
| ARB-012001 |
03 |
1 |
Differential Case |
- |
| ARB-150102 |
04 |
4 |
Return Spring |
- |
| ARB-120401 |
05 |
4 |
Cross Shaft Retaining Pin |
- |
| ARB-060104 |
06 |
1 |
Long Cross Shaft |
- |
| ARB-060306 |
07 |
2 |
Short Cross Shaft |
- |
| ARB-040601 |
08 |
1 |
Piston |
- |
| ARB-160303 |
09 |
1 |
U-Ring |
- |
| ARB-030902 |
10 |
1 |
Cylinder Cap |
- |
| ARB-160210 |
11 |
2 |
Seal Housing O-Ring |
1 |
| ARB-200207 |
12 |
6 |
Cylinder Cap Retaining Bolt |
- |
| ARB-150402 |
13 |
6 |
Locking Tab (6mm) |
- |
| ARB-160105 |
14 |
1 |
Tapered Roller Bearing |
2 |
| ARB-080603 |
15 |
1 |
Seal Housing |
- |
| ARB-SHK003 |
16 |
1 |
Shim Kit |
- |
| ARB-131004R |
17 |
1 |
Splined Side Gear |
- |
| ARB-151105 |
18 |
4 |
Pinion Thrust Washer |
- |
| ARB-140501R |
19 |
4 |
Pinion Gear |
- |
| ARB-070501 |
20 |
1 |
Spider Block |
- |
| ARB-130901R |
21 |
1 |
Side Gear |
- |
| ARB-151005 |
22 |
2 |
Side Gear Thrust Washer |
- |
| ARB-170102 |
* |
1 |
Bulkhead Fitting Kit |
- |
| ARB-170201 |
* |
1 |
Push-In Fitting (5mm to 1/8" BSPP) |
- |
| ARB-170301 |
* |
1 |
Air Line (5mm Dia x 6m Long) |
- |
| ARB-170501 |
* |
1 |
Nipple (1/8" to 1/8" BSPT) |
- |
| ARB-180103 |
* |
1 |
Solenoid Valve (12v) |
- |
| ARB-180209 |
* |
1 |
Switch |
- |
| ARB-180211 |
* |
1 |
Switch Cover (Rear) |
- |
| ARB-180210 |
* |
1 |
Switch Cover (Front) |
- |
All parts, including o-rings, are sold individually.
* Not illustrated in exploded view
1 For replacement O-rings use only BS028 Viton 75
2 For replacement bearing use Timken part # LM501349/LM501310
Not fur use with c-clip retained rear axle models unless a c-clip eliminator kit is used
 Installation Instructions
|
|
|
|
Click images below for larger view.
|
|
