FREE STANDARD SHIPPING ON ORDERS OVER $149*
FREE STANDARD SHIPPING ON ORDERS OVER $149*

PSC 2007-2018 Jeep JK Big Bore XDII-R Cylinder Assist Steering Gear

The New BIG BORE XD JK steering gear is the most powerful and strongest replacement Jeep JK steering gear on the market. Anyone with a Jeep JK running large tires and/or has a locking front differential will want this bolt on upgrade on there must have list.

  • 85MM Piston
  • 45MM Sector Shaft
  • 6 Bolt Monster Top Cover
  • 5 Pounds more Material added around bolt pattern
  • High Flow Ported Tower for Cylinder Assist.
  • Direct Bolt in
$1,350.00
SKU
PSC-SG688R

PSC Motorsports

The New BIG BORE XD JK steering gear is the most powerful and strongest replacement Jeep JK steering gear on the market. Anyone with a Jeep JK running large tires and/or has a locking front differential will want this bolt on upgrade on there must have list.

Features:

  • 85MM Piston
  • 45MM Sector Shaft
  • 6 Bolt Monster Top Cover
  • 5 Pounds more Material added around bolt pattern
  • High Flow Ported Tower for Cylinder Assist.
  • Direct Bolt in

*The BIG BORE XD produces up to 35% more turning force than the OE steering gear. By replacing the stock 70mm piston assembly to a larger 80mm piston, output torque is increased significantly. This is the same piston assembly found in all new Ram 2500/3500 diesel trucks. The increased turning torque will turn up 37" tall tires without the need of cylinder assist.

*Changed also is the sector shaft diameter. This has been increased from 35mm to 45mm to handle the extra torque output. Included in the kit is a new pitman arm that mates to the larger sector shaft. Note the pitman arm is a OE replacement and has no extra drop to it.

*Heavy Duty Case. All mounting areas of the BIG BORE XD are beefed up significantly. The BIG BORE XD weighs in 15 pounds heavier than the OE steering gear.

*Improved on road ability is achieved by changing to a slower 16:1 turning ratio.

Recommended Installation notes.

The BIG BORE XD was engineered for use of a high-pressure pump-1800 PSI. PSC highly recommends the use of their HIGH FLOW/PRESUURE pump kits designed for BIG BORE XD applications. These pumps operate at 1800 psi and produce 50% more volume per revolution than the OE pump. The factory OE steering pump operates at 1500 PSI and will operate the system, however you will not be benefiting from the full potential of the steering gear. Steering could feel worse if your OE steering pump has been overheated or has high mileage. Always use a power steering fluid cooler and PSC recommended power steering fluid.

The larger size of the BIG BORE XD may interfere with some aftermarket track bars.

Hemi engine conversions-if your AC or power steering pump is on the bottom drivers side of the engine,there might be some clearance issues.

LS3 Conversions-the alternator will need to modified for clearance