Total Chaos 3.5" 05+ Tacoma Prerunner / 07+ FJ Cruiser /03-08 4Runner 4x2 Lift Spindles
Finally a race inspired bolt on lift spindle for your 2005+ Tacoma Prerunner, 07+ FJ 4x2 and 03-08 4Runner 4x2. TOTAL CHAOS spindles are designed to add an additional 3.5" of lift and can be installed with existing aftermarket mid travel upper control arm and coil over shock packages. These systems combined provide 6"+ of lift and maximum cross member ground clearance, allowing you to Install up to a 35" tire. Our tubular tower and plate design features internal gussets along with overlay plates to add strength and reinforcement to proven weak areas. The tower includes a tapered bung that offers a pocket to access the aftermarket uniball conversion nut or the factory ball joint. The CNC machined billet hub includes a one piece bearing carrier, and caliper mounts that are integrated into the boxed main body. To maximize strength, TC's spindle was designed to not retain the factory sway bar. With the heavier spring rates of aftermarket coil over shocks and the increased track width provided by the spindles (3/4" per side), the sway bar removal is not noticeable. Removing the sway bar also allows for maximum wheel travel and articulation which will greatly improve the vehicles off road handling and performance. TOTAL CHAOS lift spindles come powder coated black and include a pair of D.O.T. approved stainless extended brake lines. Lift spindles that are intended to be installed with TC long travel systems must be specified at time of purchase. ABS wire tabs and brake line tabs are included to aid in routing the lines away from contact areas to prevent damage to these components.
Sold in Pairs
|Part #||Total Chaos Long Travel Kit|