Axial 1/10 Scale Wraith Rock Racer, Electric, 4WD, RTR (AXI90018)
Description:
Axial 1/10 Scale Wraith Rock Racer, Electric, 4WD, RTR (AXI90018) Select tabs below for product description.
Overview
Features
Specs
Manuals
True 4-wheel drive locked differentials are included for improved traction and an offset pumpkin provides more ground clearance and a better driveshaft angle. Additionally, the rear axle has been shaved of any unnecessary items and steering linkages that normally stick down have been removed for as much ground clearance as possible. The AR60 OCP-Axle™ is constructed from high strength composite material which has a low flex rate but is not as brittle as standard glass filled nylon. The AR60 OCP-Axle™ tubes are reinforced and beefed up with a boxed-in axle truss to distribute stress over a larger area. The combination of our axles and a true 4-link suspension gives you optimal performance for any terrain with the look of a real 1:1 vehicle.
Axial Wraith Rock Racer:
The Wraith™ Ready-to-Run 1/10th Scale Electric 4WD Rock Racer is another "FIRST" for Axial with the first and most realistic full tube-frame chassis design that is manufactured with high strength composite materials. The Wraith™ is built to go fast and is NOT JUST A LOW SPEED ROCK CRAWLER.
The most versatile platform:
The Axial Wraith™ changes the game with its impressive 1:1 scale looks, high-speed monster truck "bashability," and technical "crawl" capabilities. The Wraith™ is the most versatile vehicle satisfying the needs of a wide range of enthusiasts!
Go fast - Everywhere!
The realistic looks, drivability and ready-to-run ease make this vehicle the perfect blank canvas for the enthusiast looking for a vehicle to build upon. The Wraith™ can go in so many directions; desert sand, mountain trail runner, rock racer, mud bogger and any form of backyard bashing that can be dreamed up!
DIG CAPABLE TRANSMISSION
AX30793 DIG UPGRADE SET
SLIPPER CLUTCH
HIGH PERFORMANCE SHOCKS
The Wraith™ transmission is easily upgradable for Dig (patent pending) function which, when installed, gives you a three function transmission. The transmission also includes all steel outputs.
The optional Dig Upgrade Set for the Wraith™ comes with servo linkage, slider parts and a new output shaft. When installed you have 4x4, 4x2 (freewheel) and Dig (rear locked). This aids in extreme climbs and descents and turning a tight radius. (not included - extra servo and three channel radio system also required).
Allows the motor to work more efficiently and greatly enhances the durability of the drivetrain allowing the transmission to slip in hard binds.
Axial competition style shocks feature threaded shock bodies for tuning and easy pre-load adjustment, 3.5mm titanium nitride coated shock shafts for reduced lateral movement, silicone diaphragms for a more consistent feel and silicone bushings to prevent binding.
EASY DIFF ACCESS
4-LINK SUSPENSION
OPTIMIZED STEERING GEOMETRY
WB8 SPLINED DRIVESHAFT
A locked differential provides the most positive wheel traction in all off-road environments and conditions and requires less maintenance over oil-filled or silicone based differentials. These are easily serviced by removing four screws to gain access for rebuilding and performance tuning as well.
The suspension geometry utilizes a 4-Link design which is optimized to reduce axle steer and to have the proper amount of anti-squat and roll characteristics. The 4-Link system also aids against suspension wrap-up in high power applications.
The front axle steering geometry is engineered for high speed performance with close attention to maximum pivot angle, minimal scrub, adjustable castor and Ackerman set as close to 0-degrees as possible. This geometry theory achieves a desired tight turning radius with locked differentials and better steering control at high speeds.
Metal to metal universal joint driveshaft system with splined plastic slider. This design provides more durability than traditional driveshaft designs because it uses a screw shaft for a more positive lock to the output shaft.
FULL TUBE FRAME CHASSIS
ALL HEX HARDWARE
SIMPLE LED CONTROLLER
BATTERY TRAY
The most realistic high strength composite tube frame chassis on the market. Our high strength composite plastic is impact resistant to help protect the Wraith™ from crash damage.
Completely assembled with all hex hardware. No Philips screwdrivers required!
Six LED lights are included: 4 white LED lights for the front and two red LED lights for the rear. We also include the added bonus of 14 included light buckets! (7 different styles. LED’S not included). Light buckets hold 5mm and 3mm lights and come with realistic plastic lenses.
Battery tray for Standard Stick Pack and LiPo Packs
Battery: 7.2v Stick Pack/2S LiPo Pack up to 47x150x28mm (W x L x D) in size. No disassembly or tools needed to remove and replace the battery.
CONVENIENT SWITCH
CORBEAU® LG1 RACE SEATS
2.2 RIPSAW™ TIRES
VERTICALLY MOUNTED ESC WITH DRAG BRAKE
The power switch is conveniently located under the dash.
Fully licensed Corbeau® LG1 race seats add to the scale realism of the already highly detailed interior set.
Ripsaw™ tires are mounted and pre-glued to 8-spoke Rebel™ Wheels right from the factory. The Axial 2.2 Ripsaw™ tire offers both a realistic and aggressive tread design for the ultimate scale appearance and performance.
The Axial AE-2 ESC was developed in partnership with Castle Creations and features LiPo cutoff, drag brake for tough crawling situations, a Tamiya style plug connector and is programmable via Castle Link™ (Castle Link™ not included).
AR-2 2.4GHz RECEIVER
20T MOTOR
WATERPROOF RECEIVER BOX
AX-2 2.4GHz TRANSMITTER
AR-2 2.4GHz receiver - no crystals required. No frequency conflicts for worry-free driving. Bind button and LED indicator makes setup easy! 2-channel Lightweight, compact size.
Tear up the terrain, be it flat out desert, rocky roads or crawling! Easy operation: no tuning, no fuel, no loud exhaust noise. Just plug 'n' go! Our design allows for optional 550 size motors to fit as well.
Protects the receiver from dust and debris and is waterproof for the ultimate in weather protection.
2.4GHz, 2 channel pistol grip radio. Servo reversing switches for steering and throttle. Trim dials for fine tuning steering and throttle centers. Battery indicator light lets you know when your transmitter batteries run low.
CHASSIS
Wheelbase:
343mm (13.5")
Width:
295.3mm (11.6")
Height:
228.6mm (9")
Ground Clearance:
76.2mm (3")
Weight:
249kg (5.5 lbs")
ELECTRONICS
Radio:
2.4GHz, 2 channel
Servos:
AS-2 Servo, 130oz servo @6.0volt - Metal Gear
ESC:
AE-2 Forward and Reverse ESC w/Drag Brake
Motor:
20T 540/550 size
Lighting:
Simple LED controller: 4 white LED's, 2 red LED's.
