Artec Industries JK 1 Ton Swap ABS Mounting Plates

Complete your 1 Ton Swap off by providing the JK computer correct data and eliminating codes and limp mode issues.

**Use of this kit may require an optional tuner which has access to adjusting Gear Ratio and Tire size. Your actual programmer settings may differ from the axle ratio and tire size on your vehicle depending on tone ring tooth count used. If using the 60 tooth option, speedometer may be off 1 - 3%. **

• Laser Cut for precision reading from ABS Sensor. Requires machining of Hub and pressing on over machined surface.
• Zinc plated for corrosion resistance and improved sensor feedback

ART-BB1050

• Sterling ABS sensor plate mounts with 60 Tooth tone rings 
• These mounts are used with JK Factory ABS Sensors.  The 2005+ SuperDuty Dana 60 front utilizes a 60 Tooth tone ring and this kit is designed to work with a matching SuperDuty Axle set.
• If using a front axle without tone rings a second BB1054 can be used to add a second ABS Sensor to each wheel and then splice into the front sensor wiring.

ART-BB1055

• These mounts are used with JK Factory ABS Sensors.  The 1999 - 2004 SuperDuty Dana 60 front utilizes a 60 Tooth tone ring and this kit is designed to work with a matching SuperDuty Axle set.
• If using a front axle without tone rings a second BB1055 can be used to add a second ABS Sensor to each wheel and then splice into the front sensor wiring.

ART-BB1411

• This Kit Is Intended For Use With A Newer Style Disc Brake 14 Bolt Axle With Ribbing On The Casting And Has A WMS-WMS MEASUREMENT of 68" or Greater. This axle is referred to as an AAM 14 bolt 10.5" ring gear and is found in '99-'06 GM 2500 and 3500 SRW trucks. 
• These mounts are used with JK Factory ABS Sensors.  Select the Tooth count to match your front axle, Factory JK  and aftermarket axles are typically 52 tooth and the 2005+ SuperDuty Dana 60 front utilizes a 60 Tooth tone ring.
• If using a front axle without tone rings a second BB1411 can be used to add a second ABS Sensor to each wheel and then splice into the front sensor wiring.

Note: For use with ARTEC tone rings. P/N BB1401 or BB1403