All-Pro Off-Road 1995-2004 Toyota Tacoma Brake Lines

APO-5500-AP-R

DOT-approved Tacoma Rear Brake Line is suitable for all 1995-2004 Tacoma trucks with up to 3.5" [89 mm] of lift. These brake lines are constructed from extruded PTFE (Teflon™) hose with permanently crimped zinc-plated steel fittings. The brake hose is protected from debris and abrasion by a braided stainless steel wire cover. A clear PVC outer jacket provides additional protection against debris, abrasion, and corrosion.

These extended rear brake lines are a direct fit and exceed all requirements of the Department of Transportation Motor Vehicle Standard MVSS-106. The brake line has (1) male & (1) female M10-1.0 inverted flare fittings and is supplied with a retention clip.

Features:

• DOT-approved extended brake lines - suitable for lifts up to 3.5" [89 mm].
• PTFE (Teflon™) hose.
• Permanently crimped zinc-plated steel fittings.
• Braided stainless steel wire cover.
• Clear PVC outer jacket
• Individual rear brake line.
• Provided with (1) retention clip.
• Exceeds all requirements of the Department of Transportation Motor Vehicle Standard MVSS-106.
• Size: 3/16" diameter
• Length: 26” [660 mm]
• Operating Pressure: 1,750 PSI
• Burst Pressure: 7,000 PSI
• Bend Radius: 2”
• M10-1.0 Inverted Flare fittings

APO-5500T-AP-F

DOT-approved brake lines feature a stainless steel outer cover and contain a Teflon inner core hose to minimize internal friction and volumetric expansion.

Features:

• Braided stainless steel cover with Teflon inner core
• Includes 2 Clips
• 22-1/2" total length
• US Dept of Transportation (DOT) Approved - Exceeds all requirements of Federal Motor Vehicle Safety Standard § 571.106

APO-5500T-AP-KT

DOT approved brake lines feature a stainless steel cover and contain a Teflon inner core hose to minimize internal friction and volumetric expansion. They also feature steel fittings that are extremely durable and reliable. These lines are ideal for lifted vehicles up to 3.5″ of lift. Our lines directly replace your factory lines and are easy to install.

This kit comes with (2) front and (1) rear line.

Features:

• Contains a set of (3) lines: (2) 22.5" long front brake lines with banjo fittings and (1) 26" long rear brake line. These are perfect for applications with up to 3.5" lift.
• Lines have braided stainless steel cover with Teflon inner core
• US Dept of Transportation (DOT) Approved - Exceeds all requirements of Federal Motor Vehicle Safety Standard § 571.106