Genesis Offroad Digital Air Pressure Gauge Cable

Genesis Offroad Digital Air Pressure Gauge Cable

• The Genesis digital air pressure sensor option for the G Screen monitoring system allows you to keep an eye on your on-board air status.
• This is the easiest to install air pressure sensor on the market.
• Simply screw the sensor into an available 1/4 inch NPT port (use adapters as required for your application) on your on-board air tank or manifold, attach the cable and plug it into the G Screen's interface module.
• The G Screen will automatically detect the sensor and will add a new PSI status screen the next time you cycle through the screens. If the sensor is removed, the PSI screen will automatically disappear.
• No need to run air hoses through the vehicle to an old analog pneumatic gauge, and no complicated wiring to figure out. One cable to connect and you're done.
• Reads air pressure from 0 - 150 PSI.
• Not rated for reading pressure inside a CO2 systems such as a Powertank, but it can be used after the pressure regulator to help keep an eye on your pressure settings.

Cable length option:

This sensor kit comes with a 2 meter cable (6.5 feet) (GEN-162-APS) to connect the sensor to the G Screen. This is a perfect length for connecting to a compressor in the engine bay.