Rock Hard 4x4 Oil Pan Skid/Exhaust Crossover Shim Plate for 2007-2018 Jeep Wrangler JK 2/4DR

If you've added a custom exhaust system to your Jeep Wrangler JK then you may have changed your crossover pipe clearance. Rock Hard 4x4's Oil Pan/Transmission skid plate is designed for factory exhaust systems and any change in tolerance may cause unwanted vibration or noise. Prevent that by adding Rock Hard 4x4's shim plate! Some aftermarket suspension systems require an exhaust spacer be installed which invariably moves your exhaust crossover pipe down. Don't wheel unprotected simply because your exhaust has been modified - keep your Rock Hard 4x4 Oil Pan/Transmission skid plate installed and wheel with confidence!

Rock Hard 4x4's skid plate shim is laser cut and powder coated. Designed to fit both the 2007 - 2011 3.8L and 2012 - 2018 3.6L engines plus transmission and dual cat system.

Features:

• 3/16" Thick Steel or 1/4" Thick Aluminum
• 100% Bolt on Install
• Black Powder Coat Finish
• 100% Made in USA
• Lifetime Warranty

Includes:

• Oil Pan/Trans Shim Plate

Fits the Following Rock Hard 4x4 Oil Pan/Transmission Skid Plates:

• RHF-RH-6000-LA
• RHF-RH-6003

Notes:

• All Rock Hard 4x4 Jeep Wrangler JK Oil Pan/Transmission Skid Plates include a shim. This is an ADDITIONAL skid plate you can purchase if you have modified exhaust at your crossover pipe.This is not needed on all applications. A breakdown of suspension systems is not available due to variances in models. This shim plate can be added at anytime after Oil Pan/Transmission Skid Plate install.