Fox Eyelet for 7/8"-1.25" Shaft with 1" Thread Length & -10 Heim

Fox offers mutiple length eyelets for their shocks to support clearance needs and overall extended/collapsed lengths. These eyelets are used on Coil-Overs, smooth body shocks, bypasses and 2.5" air shocks.

Length is measured from center of bearing to top of eyelet where shaft enters.

Eyelets do not come with bearings (heims) or snaprings.

• Snaprings (2 required) - FOX-038-00-007-A
• Bearing (1 required) - FOX-001-00-006-A (or FKB-COM10T, FKB-FKS10T)

These ONLY fit shafts that have a 1.00" thread length, if you have a shaft with 0.600" thread length you will need a differnt eyelet. They DO NOT fit 2.0" airshocks.

For coilover applications without a slotted spring retainer you will need (2) silver retainer clips for each eyelet, part number FOX-234-00-031, and (1) o-ring to keep the clips in place, part number FOX-029-00-031.

2.5" ID springs will use a FOX-234-00-884 spring retainer.
3.0" ID springs will use one of the following spring retainers: FOX-234-00-388 (slotted), FOX-234-00-232, FOX-234-00-239, FOX-234-00-350, or FOX-234-00-383.
3.75" ID springs will use either FOX-234-00-166 or 234-00-370.