TeraFlex Jeep JK Wrangler 3" Suspension System

The TeraFlex JK 3" Suspension Lift Kit delivers everything that you need to tackle some serious trails. Drivability and performance are the most important factors that are engineered and built into every TeraFlex lift kit. Properly developed suspension geometry, roll center, and load tuning ensure that all factory stability controls remain functional and within the parameters that Jeep originally engineered into the vehicle. TeraFlex kits drive straight and will crawl anything, getting you there and back! This kit will allow you to run up to a 35” tire (aftermarket wheels with 4.5” backspacing or less are required). Fits all JK Wrangler 2 Door models including Rubicon*.

Includes:

• 3" lift coil springs
• Front swaybar link
• Rear trackbar bracket
• Bumpstops
• All necessary Hardware

Available Packages:

• Base (TFX-1151202)**
• 9550 Shocks (TFX-1251202)**

Notes:

• Kits allow you to run up to a 35" tire. Aftermarket wheels with a 4.5" backspacing or less are required.
• TeraFlex highly recommends that you make driveline modifications with these suspension systems.
• *Fits all JK Wrangler models including Rubicon. 2012+ JKs require exhaust spacers (TFX-2610000) or other exhaust modification for proper driveshaft clearance.
• **TFX-1151202, TFX-1251202 must be used with adjustable control arms to establish correct caster and pinion angle during re-alignment.