RockJock Jeep JK Antirock Front Sway Bar Kit

CE-9900JKF

RockJock's Antirock Sway Bar Kit for the front of all JK Wrangler and Unlimited models helps free up suspension articulation to increase off-road traction. The Antirock sway bar easily bolts on with hand tools and is designed to directly replace the vehicle’s stock front sway bar. The Antirock does not require disconnecting for off-road use!

The sway bar is made of 4130 heat treated chromoly for ultimate strength, which is the same quality used in professional off-road competition sway bars.

Kit Fits:

• JK Wrangler Unlimited (4-door)
• JK Wrangler (2-door)

Kit Includes:

• .850 in. diameter 4130 heat treated chromoly sway bar
• Forged 4140 chromoly bolt-on frame brackets
• Forged chromoly offset sway bar arms
• Adjustable sway bar end links w/ sealed ends
• Delrin sway bar bushings
• All required hardware and step-by-step instructions

Notes:

• Rubicon Models - JK Rubicon models equipped with the electronic sway bar, will require the use of a tuner (AEV ProCal or equivalent) to turn off the sway bar dash light when the factory sway bar is removed.
• Body Roll - Antirock sway bar equipped vehicles will exhibit more body roll than vehicles equipped with the stock sway bar. Antirock sway bars may be used on the street, however, they do not provide the same handling characteristics as the stock sway bar.
• End Links - Out of the box, the length of the sway bar’s vertical links that are included in this kit are intended for use with our suspension systems (4 in. lift). Depending upon your specific vehicle’s lift, you may obtain shorter or longer links to suit, here. Additionally, all of the link rods may also be trimmed in length for fine tuning purposes.

Installation Instructions

Parts List:

• Sway Bar Torsion Bar: CE-99001D
• Forged Sway Bar Frame Bracket (LH): RJ-231100-1
• Forged Sway Bar Frame Bracket (RH): RJ-231100-2
• Forged Sway Bar Arms: RJ-202001-101
• Adjustable Sway Bar End Links: RJ-203004-101
• Delrin Sway Bar Bushing: CE-9901D
• Sway Bar Arm Hardware Pack: CE-99005A
• Sway Bar Arm Stickers: RJ-720301-101

RJ-236100-101

Overlanders and Racers! We heard you and the wait is over! Our heavy bar Antirock Sway Bar Kit for the front of all JK Wrangler and Unlimited models features a 1 in. diameter bar! This heavier bar considerably increases the rate of the front sway bar for those with racks, roof top tents, camping gear, etc. This heavy bar kit is also applicable to desert racing applications.

This kit easily bolts on with hand tools and is designed to directly replace the vehicle’s stock front sway bar. The bar is made of 4130 heat treated chromoly for ultimate strength, which is the same quality used in professional off-road competition sway bars.

The Antirock front sway bar, when used in conjunction with a rear Antirock sway bar, provides a more stable feeling cabin and balanced performance of front and rear suspension in rugged off-road conditions. Antirocks gives the driver increased traction by balancing and distributing the weight and traction over all four tires.

Kit Fits:

• JK Wrangler Unlimited (4-door)
• JK Wrangler (2-door)

Kit Includes:

• 1 in. diameter 4130 heat treated chromoly sway bar
• Forged 4140 chromoly bolt-on frame brackets
• Forged chromoly offset sway bar arms
• Adjustable sway bar end links w/ sealed ends
• Delrin sway bar bushings
• All required hardware and step-by-step instructions

Notes:

• Rubicon Models - JK Rubicon models equipped with the electronic sway bar, will require the use of a tuner (AEV ProCal or equivalent) to turn off the sway bar dash light when the factory sway bar is removed.
• Body Roll - Being that this kit features our heavy torsion bar, if this kit is used in unloaded vehicles, you may find the front sway bar to be stiffer than you would prefer. This kit is intended for use on vehicles that are loaded down with a rack, roof top tent, camping gear, etc. If this does not sound like your application, you may be more of a customer for our standard CE-9900JKF kit.
• End Links - Out of the box, the length of the sway bar’s vertical links that are included in this kit are intended for use with our suspension systems (4 in. lift). Depending upon your specific vehicle’s lift, you may obtain shorter or longer links to suit, here. Additionally, all of the link rods may also be trimmed in length for fine tuning purposes.

Installation Instructions

Parts List:

• Sway Bar Torsion Bar: RJ-204002-3
• Forged Sway Bar Frame Bracket (LH): RJ-231100-1
• Forged Sway Bar Frame Bracket (RH): RJ-231100-2
• Forged Sway Bar Arms (pair): RJ-202001-101
• Adjustable Sway Bar End Links: RJ-203004-101
• Delrin Sway Bar Bushing: CE-9901D
• Sway Bar Arm Hardware Pack: CE-99005A
• Sway Bar Arm Stickers: RJ-720301-101

RJ-236101-101

RockJock's Antirock Sway Bar Kit for the front of all JK Wrangler and Unlimited models helps free up suspension articulation to increase off-road traction. The Antirock sway bar easily bolts on with hand tools and is designed to directly replace the vehicle’s stock front sway bar. The Antirock does not require disconnecting for off-road use!

The sway bar is made of 4130 heat treated chromoly for ultimate strength, which is the same quality used in professional off-road competition sway bars.
This specific kit features our fully CNC machined billet 7075 aluminum sway bar arms and billet aluminum frame brackets for the ultimate in high-end appearance!

Kit Fits:

• JK Wrangler Unlimited (4-door) - All Models
• JK Wrangler (2-door) - All Models

Kit Includes:

• .850 in. diameter 4130 heat treated chromoly sway bar
• Billet aluminum bolt-on frame brackets
• Billet aluminum offset sway bar arms
• Adjustable sway bar end links w/ sealed ends
• Delrin sway bar bushings
• All required hardware and step-by-step instructions

Notes:

• Rubicon Models - JK Rubicon models equipped with the electronic sway bar, will require the use of a tuner (AEV ProCal or equivalent) to turn off the sway bar dash light when the factory sway bar is removed.
• Body Roll - Antirock sway bar equipped vehicles will exhibit more body roll than vehicles equipped with the stock sway bar. Antirock sway bars may be used on the street, however, they do not provide the same handling characteristics as the stock sway bar.
• End Links - Out of the box, the length of the sway bar’s vertical links that are included in this kit are intended for use with our suspension systems (3.5 in. lift). Depending upon your specific vehicle’s lift, you may obtain shorter or longer links to suit, here. Additionally, all of the link rods may also be trimmed in length for fine tuning purposes.

Installation Instructions

Parts List:

• Sway Bar Torsion Bar: CE-99001D
• Billet Aluminum Sway Bar Frame Bracket (LH): CE-9900JK-MAL
• Billet Aluminum Sway Bar Frame Bracket (RH): CE-9900JK-MAR
• Billet Aluminum Sway Bar Arms: RJ-202011-101
• Adjustable Sway Bar End Links: RJ-203004-101
• Delrin Sway Bar Bushing: CE-9901D
• Sway Bar Arm Hardware Pack: RJ-520202-101