ARB RD03 Parts - Land Rover, 10 Spline, Banjo

View Large Image

Details:

SKU:	ARB-120102-RD003
Weight:	0.25 lbs
Price:	$5.00

Options:

Part #

Quantity

Add to Cart

Add to Wishlist

Description:

This locker has been replaced by RD127.
Click here to view the new listing.

Specs:
Axle Spline	10 tooth, Ø28.2mm (1.11")
Ratio Supported	3.54:1
Ring Gear ID	125.4mm (4.94")
Ring Gear Bolts	10 bolts on Ø142mm (5.59")
Ring Gear Torque	58Nm (43 ft-lb)
Backlash	0.10-0.17mm (0.004-0.007")
Bearing Cap Torque	90Nm (66 ft-lb)

Part #	Item #	Total # Req'd	Description	Notes
ARB-020404	01	1	Flange Cap	-
ARB-050102	02	1	Clutch Gear	-
ARB-010404	03	1	Differential Case	-
ARB-150101	04	4	Return Spring	-
ARB-120102	05	2	Cross Shaft Retaining Pin	-
ARB-120302	*	2	Cross Shaft Retaining Pin	-
ARB-060103	06	1	Long Cross Shaft	-
ARB-060303	07	2	Short Cross Shaft	-
ARB-040103	08	1	Piston	-
ARB-160701	09	1	Bonded Seal	-
ARB-030120	10	1	Cylinder Cap Assembly	-
ARB-200205	11	6	Cylinder Cap Retaining Bolt	-
ARB-150401	12	6	Locking Tab (8mm)	-
Not Supplied	13	1	Tapered Roller Bearing	-
ARB-150602	14	1	Seal Housing Retaining Clip	-
See Note	15	1	Splined Side Gear	-
ARB-151101	16	4	Pinion Thrust Washer	-
See Note	17	4	Pinion Gear	-
ARB-070101	18	1	Spider Block	-
See Note	19	1	Side Gear	-
ARB-151001	20	2	Side Gear Thrust Washer	-
ARB-100201	21	1	Adjuster Nut (1.5mm Thread Pitch)	2
ARB-100301	*	1	Adjuster Nut (16 TPI Whitworth)	2
ARB-082001	22	1	Seal Housing	1
ARB-160206	23	2	Seal Housing O-Ring	-
ARB-170111	*	1	Bulkhead Fitting Kit (O-Ring Type)	-
ARB-170201	*	1	Push-in Fitting (5mm to 1/8" BSPP)	-
ARB-170501	*	1	Nipple (1/8" to 1/8" BSPT)	-
ARB-170301	*	1	Air Line (5mm Dia x 6m Long)	-
ARB-180103	*	1	Solenoid Valve (12v)	-

All parts, including o-rings, are sold individually.
* Not illustrated in exploded view.
1 For replacement O-rings use only BS130 Viton75
2 Both types of Land Rover adjuster nut are supplied with this model. Early models using 100301 will require a special carrier bearing to suit the Air Locker. (Timken #11162 / 11300)
3 Available only as complete 6 gear set # 728B011

5mm [3/16"] ring gear spacer plate (ARB part# ‘RD03A’) is available for use with early Land Rover 4.70:1 ratio gears but longer bolts must be used. (Land Rover part# 576521)
For information on RD03 models with 4 cylinder cap bolts, contact ARB

Installation Instructions