Description:
PSC steering gears are built to be as tough as any steering gear on the market. Our experience has led to developing a line of steering gears that are built with a combination of time proven components that work off-road. Cases get full machine shop attention. They are honed, trued and sleeved if required. O.E. spool valves are completely dis-assembled, inspected, modified with proper T-bar, reassembled and tested for proper flow balance. All reconditioned components are inspected for wear, and are magna fluxed to find cracks that are not normally visible.
All steering gears modified for cylinder assist applications are built to flow fluid throughout the circuits as efficiently as possible. There is actually a science to getting a cylinder assist system to work at its optimum performance. When it comes to cylinder assist steering gears, PSC builds one of the best you will find. You must achieve a balance, and there's no replacement for over 20 years experience.
PSC offers standard remanufactured steering gears in some applications, these gears are stock appearing. Extreme Duty gears feature billet aluminum end caps and covers.
| Part # |
Model |
| PSC-SG061-N |
Extreme Series Steering Gear |
| PSC-SG061R |
Extreme Series Steering Gear with Ram Assist Ports |
Select model below for product description.
- Extreme Series
- Extreme Series with Ram Assist Ports
- For 80-02 Jeep YJ, TJ and XJ
- 13-16:1 variable ratio
- 3/4"x30 input shaft
- Large 3.125" piston diameter
- Metric o-ring type ports
- Will not work on 03-06 Wranglers
- For 80-02 Jeep YJ, TJ and XJ
- 13-16:1 variable ratio
- 3/4"x30 input shaft
- Large 3.125" piston diameter
- Metric o-ring type ports
- Modified for Cylinder Assist
- Will not work on 03-06 Wranglers
|
|
