Trail-Gear Toyota Weld-On Rock Sliders

Rock sliders are a great way of protecting the rocker panels of your Toyota Pickup, 4Runner, Tacoma, or FJ Cruiser. Trail-Gear has designed its Rock Sliders to be the strongest on the market, starting with 1-3/4" OD x .120 wall 1035 DOM. Trail-Gear Rock Sliders are the only rock sliders on the market that use 1035 DOM tubing. Based on Trail-Gear's testing Trail-Gear believe that using DOM tubing in this application makes Trail-Gear's rock sliders the strongest, most affordable available today. Other companies try and cut manufacturing costs by using less expensive HREW tubing, but the end result is always the same, under extreme stress the HREW tubing splits down the seam, failing.

Trail-Gear's heavy-duty design can take a pounding from the rocks while keeping body damage to a minimum, allowing you to slide over or between rocks on even the hardest trails without damage. Trail-Gear rock sliders are strong enough to hold the entire weight of the truck, a high-lift jack can be used anywhere along the slider for repositioning the rig on the trail, or simply high-lifting it up for repairs.

The mounting legs are not welded onto the slider but are shipped loose so that legs can be attached in different mounting positions. Mounting legs are pre-notched on one side and can be trimmed if needed on the opposite side. Mounting legs are 11-1/4" long, so they allow the sliders to stick out far enough to be used as a step if desired. Six mounting legs, three per side, are provided with the 58" and the 67" sliders, and eight mounting legs, four per side are provided with Trail-Gear's 78" sliders. Trail-Gear rock sliders are sold in pairs, shipped raw with no finish, and are lightly oiled to prevent rusting.

Features:

• Made out of 1 3/4" OD x .120 wall 1035 DOM
• Mounting legs are 11 1/4" long
• Six mounting legs, three per side, are provided with the 58" and the 67" sliders, and eight mounting legs, four per side are provided with Trail-Gear's 78" sliders
• Sold in pairs, shipped raw with no finish, and lightly oiled to prevent rusting

Applications:

• 1979-1995 Toyota Pickup (All Engines)
• 1985-1995 Toyota 4Runner (All Engines)
• 1995-CURRENT Toyota Tacoma (All Engines)

Sizes:

• 58" Shortbed/4Runner, Pair, TGI-120001-1-KIT 
• 67" 1984-1988 Xtra-Cab, Pair, TGI-120002-1-KIT 
• 78" 1988-2004 Xtra-Cab, Pair, TGI-120003-1-KIT

Toyota Tacomas:

• 58" Sliders (TGI-120001-1-KIT) - Short Bed Single Cab Tacoma
• 78" Sliders (TGI-120003-1-KIT) - Extra Cab/Double Cab Tacoma

Installation Instructions

Shipping Charges:
Estimated shipping cost for this item is $250. The actual shipping cost may vary depending on your location. Please call 805-783-2060 if you have any questions.