Carli 2.5" Front Leveling System for 2017+ F250/F350 4x4

Level the front of your truck with this custom-tuned, ultra-refined system that delivers 50% more front suspension travel than the stock Super Duty.

Fits:

• 3.5" Lift - 2020+ F250/350 4x4 Diesel, Base Kit
  
• 2.5" Lift - 2017-19 F250/350 4x4 Diesel, Base Kit

The Leveling System was designed for people seeking a leveled vehicle with more performance and ride quality than a generic spacer lift. The included, front, Carli Signature Series Shocks are longer to accommodate the extended travel. When designing the shocks, Zinc plating, Clear Coat for corrosion resistance and quality bushings were a must; finished off with boots to protect the shafts, Carli back them with a limited lifetime warranty to ensure their quality is as unbeatable as their ride quality at this price point.

The truck will sit 2.5" higher in the front and have more wheel travel thanks to the lighter rate Carli Coil Springs. Extended, Stainless Brake Lines firm up braking and ensure there is enough line for the newfound travel. To round off the front end, Carli include Caster Shims to tighten the steering. Carli recommend adding an Adjustable Track Bar to center the front axle; for those that do not wish to, Carli include Carli's High-Clearance Bump Stop Drop to keep the springs clear from the contacting the factory bump stop given the slight driver’s side shift of a leveled Super Duty without a track bar. The front Sway Bar Geometry will need to be addressed with your choice of a Sway Bar Drop Bracket (more economical, maintains the factory Sway Bar End Links) or Carli's Extended Sway Bar links – a FAR more robust option. The replacement End Links are the only option compatible with a plow bracket.

The front will sit level to the rear and payload is maintained as the rear springs are unaltered in this system.

Wheel and Tire: Factory Wheels SHOULD NOT be run with oversized tires. They’re known to rub the radius arm, sway bar and most concerning – Brake Lines. Factory tires and factory wheels will work without issue but Carli DO NOT recommend running oversized tires on factory wheels. On Carli's 2.5" Ford Systems, Carli recommend 17"-18" wheels, no more than 9" wide with 5.5" of backspacing with Carli Fabricated Radius Arms or 5" Backspace with factory arms; 5" will require a bit more trimming. Tires, 37×12.5" will fit with some trimming; 35" will likely fit without trimming. The more rubber, the better the small bump compliance will be at proper inflation pressures. The ride will firm up as you go larger in wheel diameter.

Note: A “Base Kit” must be accompanied by a Sway Bar Option to form a complete system.

Base Kit:

• (1) CS-FLC-05 - Front Leveling Coils
  
• (1) CS-FSIG20SPKG-FRONT-LVL-05 - Ford Signature Series FRONT Shock Package, LVL
  
• (1) CS-FORDBBL-LVL-17-F - Front Brake Lines
  
• (1) CS-FCASTERSHIM-2.5 - 2° Caster Shims
  
• (1) CS-FBDF-2.5-17 - High Clearance Bump Stop Drops, Front

OPTIONS:

Sway Bar Drop Brackets, Leveling - CS-FSBD-LVL-17

• Corrects Sway Bar Geometry in Carli Leveling Suspensions
  
• Fitment: 2017+ F250/350 4x4

Sway Bar End Links, Leveling - CS-FEL-LVL-17

• Extended Length to accommodate Leveled Trucks
  
• 17-4 Stainless Steel, Greasable and Fully Rebuildable
  
• Excellent Articulation
  
• Only Works on Carli Leveling Lifts
  
• Fitment: 2017-19 F250/F350 4x4

Torsion Sway Bar - WITH End Links, Leveling - CS-FTSB-LVL-17

• Direct Fitment to Carli Leveling Lifts
  
• Replaces Immobile Factory Sway Bar with Custom Torsion Bar
  
• Huge Ride Quality Improvement
  
• Includes CS-FEL-LVL-17 Drop Brackets and Sway Bar Links
  
• Fitment: 2017+ Ford F250/F350 4x4

Matching Rear Shocks, Leveling, Rear - CS-FSIG20SPKG-REAR-LVL-05

• 2.0" Carli Signature Series Shocks, Rear Pair
  
• Carli Custom Tuned
  
• Clear Coated Bodies for Corrosion Resistance
  
• Boots Included for Shaft Protection
  
• 12" Rear Wheel Travel
  
• Fitment: 2005+ F250/350 4x4 with 0-2" Rear Lift

Adjustable Track Bar - CS-FATB-17

• Massive Steering Upgrade
  
• Vibration Damping CUB Joint
  
• Fully Rebuildable
  
• 2017-19 Configurable to Carli 2.5"-4.5" Lifts
  
• 2020+ Configurable to Carli 3.5"-5.5" Lifts
  
• NOT for use on stock-height Trucks.
  
• 2017+ F250/350 4x4

High Mount Steering Stabilizer - CS-FHMSS-17

• Inside the Carli Stainless Stabilizer
  
• Long Lasting Performance and Appearance
  
• Bolt in Replacement for OEM Stabilizer
  
• Fitment: 2017+ F250/350 4x4
  
• Works on leveled and lifted trucks ONLY

Low Mount Steering Stabilizer - CS-FLMSS-05

• Inside the Carli Stainless Stabilizer
  
• Custom Valved for Larger Tires, Adjustable Nitrogen Pressure
  
• Includes Differential Guard and Clamp
  
• Combines with High-Mount Stabilizer for Opposing Setup
  
• Fitment: 2005+ F250/350 4x4
  
• Optimized for Carli 2.5"-5.5" Systems

Fabricated Radius Arms, 2.5" Lift - CS-FARA-LVL-05

• 1° of Caster correction engineered into arm
  
• 3/16 Construction, Fully Internal Gusseted with 1/2" Additional Tire Clearance
  
• Limit Straps Kit Included
  
• Serviceable 17-4 Stainless Spherical Joint at Frame Connection for longevity and bind free Cycling
  
• Combines with Radius Arm Drop Brackets for 4.5" Carli Systems
  
• Fitment: 2005+ F250/350 4x4