Fox 3.0 Factory Series Internal Bypass Coilover Front Shock Kit for 2010-2014 Raptor SVT
These heavy-duty, steel-bodied shocks are loaded with anodized billet aluminum components and race-bred internal valving. They are designed to bolt right on to your factory mounts. The integrated coil spring can be adjusted for preload and ride height and come pre-set to level your vehicle right out of the box. Large 2.5 inch remote reservoirs with a large -10 hose increasing the shocks cooling capabilities. The Factory Race Series 3.0 Coil-over Internal Bypass shocks utilize all of the same components from Fox's race winning Trophy Truck shocks with Eibach® springs, stainless steel shock shafts, PTFE-lined spherical bearings, proprietary racing oil and high-temp Viton® seals.
At FOX, racing has always been the cornerstone of Fox's product development. Fox's 3.0 Factory Race Series Coil-over Internal Bypass, position-sensitive shocks maximize the entire wheel travel, increases oil capacity, and adds 60% more damping area over the stock FOX SVT shocks. They allow for a plush predictable ride over normal off-road driving conditions and also have the ability to ramp up damping force for extreme use.
These heavy-duty, steel-bodied shocks are loaded with anodized billet aluminum components and race-bred internal valving. They are designed to bolt right on to your factory mounts. The integrated coil spring can be adjusted for preload and ride height and come pre-set to level your vehicle right out of the box. Large 2.5 inch remote reservoirs with a large -10 hose increasing the shocks cooling capabilities. The Factory Race Series 3.0 Coil-over Internal Bypass shocks utilize all of the same components from Fox's race winning Trophy Truck shocks with Eibach® springs, stainless steel shock shafts, PTFE-lined spherical bearings, proprietary racing oil and high-temp Viton® seals.
Specs:
- Performance Tuned For Vehicle Specific Application
- Durable Cerakote Plated Seamless Alloy Body
- External Reservoir System Dissipates Heat Fast
- Black Anodized CNC Machined Aluminum Components
- Series: Factory Race
- Body: 3.0" Smooth bore and honed seamless alloy body
- Body Plating: Cerakote finish
- Reservoir: 2.5" Smooth bore and honed seamless alloy reservoir
- Components: Black-anodized, CNC-machined 6061-T6 billet aluminum
- Shaft: 7/8" 17-4 H900 stainless steel hard-chrome plated
- Piston: 6061-T6 hard-anodized, high flow aluminum piston
- Valving: Application specific valving to maximize performance
- Seals: Redundant sealing pack system main seal, wiper seal, scraper seal Optional high temperature Viton seals
- Bearings: PTFE-lined, heat-treated, alloy steel spherical
- Extended Length: 27.97"
- Compressed Length: 20.44"
- Travel: 7.53"
- Top Mount: TM
- Bottom Mount: Eyelet
| Part # | Extended Length | Compressed Length | Travel | DSC Adjuster |
|---|---|---|---|---|
| FOX-883-02-233 | 27.97" | 20.44" | 7.53" | No |
| FOX-883-06-233 | 27.97" | 20.44" | 7.53" | Yes |
CALIFORNIA RESIDENTS - WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
