FREE STANDARD SHIPPING ON ORDERS OVER $149*
FREE STANDARD SHIPPING ON ORDERS OVER $149*

Reid Stock Replacement Knuckle, HD Chevy 10-Bolt Flat Top, Right

Reid Stock Replacement Knuckle, HD Chevy 10-Bolt Flat Top, Right
$259.00
SKU
DBP-C10002R

Reid Racing
  • Only available as a right, passenger-side knuckle
  • Identical to the regular Reid Chevy Dana 44 & 10-BOLT passenger-side knuckles, but without orange powdercoating
  • Ideal for crossover steering applications where the OEM non-powdercoated driver's-side knuckle is retained
  • Only available for the passenger side
  • Chevy/Jeep spindle bolt pattern accepts "outers" from all open knuckle Chevy half-ton and 3/4-ton front ends
  • Cast from high strength ductile iron
  • Machined with a "bottom up" taper to match OEM Chevy 10-Bolt tie rod location
  • Beefed up with extra material and ribbing
  • Flat tops machined and drilled for high steer arms
  • 4th bolt hole for high steer arms increases clamping force and sheer strength 
  • 3/8" thickness added to flat top of the knuckle for high steer tie rod to leaf spring clearance
  • Cast-in DUAL steering stops eliminate bent stop bolts that can cause u-joint and axle failures
  • Tapered tie rod holes accept factory tie rod ends
  • Tie rod holes can be drilled to accept 3/4" heim ends
  • Interchangeable with all factory and aftermarket Dana 44 and 10-Bolt components
  • Fully machined and ready for installation
  • Machined to clear CTM u-joints without removing the grease fittings