Van Compass Stage 3 - 2007+ Sprinter 2500/3500 2WD, 2.1 Struts and Shocks

The Stage 3 system is targeted at rear heavy vans like RV's and coaches. Now including Van Compass Inverted Rally strut, it builds on the Stage 1 kit by adding a rear Sumo spring upgrade for increased control.

Falcon 2.1 dampers at all 4 corners, expertly tuned for van users, dramatically improve handling. The innovative, inverted design of Van Compass Rally Strut is much more durable for heavily loaded vans, and dramatically increases handling control in the front end. With superior construction and a larger, more effective damper piston, these shocks will completely change the driving dynamics of your van. A more effective damper reduces leaning in corners, violent swaying, and smooths out jarring impacts. This in turn increases comfort and safety factor, while reducing driver fatigue.

Van Compass progressive foam Bump Buddy replacement jounce bumpers replace your hard factory rubber bump stops, adding improved spring curve progression, reducing sway, and increasing bottom out resistance without any unnecessary clunking or harshness. In the rear, Van Compass utilize Sumo Springs to prevent sag and limit harsh bottom out when loaded.

Features:

• VC Inverted Monotube Rally Struts
• VC tuned Falcon 2.1 Monotube Shocks
• Enhanced cornering stability and reduced wind sway
• More effective control over large and small bumps
• Improved handling feel on rough roads and broken pavement
• Increased bottom out resistance
• Increased rear spring rate for heavily loaded vans

Intended Use:

• RV and conversion vans that suffer from bottom out
• Heavy passenger vans that want a basic ride quality upgrade

Includes:

• Monotube Inverted Rally Struts
• Front Bump Buddies Jounce Bumpers (pair)
• Falcon 2.1 monotube shocks **choose your tune based on loaded van weight**
• Rear Sumo springs (pair)

Notes:

• For SPRINTER 2500 - NOT compatible with Sumo Spring Rebel series of springs, specifically Sumo Spring part numbers: SSR-327-47-2 and SSR-327-40-2 There is a Sumo Spring bracket associated with those kits which makes contact with the shock body.